A generation of sensors based on luminescence lifetime
- Oxygen is not consumed during the experiment
- Immune to electrical and magnetic interference
- Excellent long-term stability
- No lengthy polarization necessary (like Clark-type O2 electrodes)
- Fast response time < 0.5 s for MicroTip sensors
- Probe size of MicroTip sensors as small as 50 µm
- Measurement is feasible in dry gas
- Optical isolation of sensor tip available for fluorescent or photosynthetically active samples
Click here to view the current Data Sheet.
Benefits
- Unaffected by light source stability and intensity fluctuations, because it is based on luminescence lifetime detections.
- Compact, portable meters may be used inside or outside
Applications
- Process control like bottling plant in breweries and quality control of packages (OxyMini)
- Biotechnology like control of cell culture media and non-invasive control of bioreactors (OxyMini)
- Implantation of oxygen sensors into soil and trees (OxyMini)
- Oxygen profiles of marine sediment, soils, or tissue (OxyMicro)
- Implantation in living tissue like heart or muscle tissue (OxyMicro)
- Control of cell culture media in Biotechnology (OxyMicro)
The measurement principle of the sensor system is based on the detection of oxygen concentration as a function of luminescence lifetime, either in dissolved or gaseous phase environments.
Unaffected by light source stability/intensity
Conventional fiberoptic oxygen sensor systems based on intensity measurements are limited in their accuracy by light source stability and ambient light fluctuations. Using a luminescence lifetime detection, measurements are not affected by light source stability, intensity fluctuations caused by fiber bending or changes of the optical properties of the sample (turbidity, refractive index, coloration, etc.).
Calibration: The sensors can be calibrated by a simple two point calibration, 100% air-saturation and 0% air saturation.
Compact, portable meters, inside and outside
The OxiMini and OxyMicro fiber optic oxygen meters are compact, easy to transport. Designed for in/outdoor use, they can be connected to a PC via a RS232 interface. Data can be visualized, analyzed and stored with supplied software. A full range of sensors are available.
OxyMicro systems
OxyMicro is a one channel O2 meter for fiber optic O2 microsensors.
MicroTip – 
The MicroTip (501656) is a needle-type (27 ga.) oxygen micro sensor designed for applications where a small tip size (50 µm) and fast response time (t90) of 1 s are required. The oxygen sensitive sensor tip consists of 140 µm fiber tapered to a 50 µm tip. Housed inside a stainless steel needle 22 mm long and 0.4 mm diameter, it can penetrate a septum rubber or similar material. They are ideal for oxygen profiling in sediments and biofilms.
MicroFlow – 
The MicroFlow oxygen sensor (501657) is a miniaturized fiber optic chemical sensor optimized for fast response time (t90 < 1 sec in gases, < 5 sec in liquids). The tiny probe has a tip size of 50 µm and is integrated in a T-shape flow cell for easy connection via Luer-Lock adapters to external tubings. Liquids (like water, blood, etc.) can be pumped through the cell.
MicroImplant – 
The MicroImplant oxygen sensor (501658) is an implantable probe (IMP) with a probe tip size 50 µm, an exposed fiber length of 5 mm and a jacket diameter of 900 µm. It was successfully implanted in crabs, fishes and soil.
OxyMicro Instruction Manual
| MiniTip | MiniFlow | MiniSpot | MicroTip | MicroFlow | MicroImplant | |
| MEASURE RANGEDISSOLVED/GASEOUS | 0-45 ppm, 0-100%0-760 mmHg | 0-45 ppm, 0-100%0-760 mmHg | 0-45 ppm, 0-100%0-760 mmHg | 0-45 ppm, 0-100%0-760 mmHg | 0-45 ppm, 0-100%0-760 mmHg | 0-45 ppm, 0-100%0-760 mmHg |
| RESPONSE TIME [T₉₀]DISSOLVED/GASEOUS | 40 s10 s | 40 s10 s | 40 s10 s | < 2 s< 0.5 s | < 2 s< 0.5 s | < 2 s< 0.5 s |
| STERILIZATIONETOH, H₂O₂AUTOCLAVABLE* | YN | YY | YY | YN | YY | YY |
| DRIFT** | < 0.1% | < 0.1% | < 0.1% | < 0.3% | < 0.3% | < 0.3% |
| ACCURACY*** | 0.2% | |||||
| RESOLUTION*** | 2.75 ±0.01 ppm, 9.00 ±0.05 ppm, 220 ±0.15 ppm, 45.0 ±0.25 mmHg,150 ±0.75 mmHg, 375 ±2.6 mmHg | |||||
| TEMP RANGE | -10°C to 50°C | |||||
| PROBE ASSY LENGTH | 2.5 m | |||||
| *130°C, 1.5 atm **100,000 data points, 20°C ***20°C | ||||||
MicroFlow - Flow-through housed oxygen microsensor501657For pricing, Customers outside of the US and Canada, please contact your distributor.
MicroTip - Fiber Optic Oxygen SensorMultiple SKUs
MicroImplant - Implantable Oxygen Microsensor501658For pricing, Customers outside of the US and Canada, please contact your distributor.
WPI(World Precision Instruments Inc.)公司的使命是给神经生理学、心血管生理学和细胞生物学等广大 生物医学科研工作者提供研究用的仪器和工具，使其研究更完善，更**，更精确。WPI China将秉承WPI的理念为中国大陆，中国香港和台湾地区科学 研究者提供优质的产品和周到的服务。
近年来，WPI产品线由神经电生理产品逐渐延伸到生物感应器，心血管生理、病理和心血管药理，光谱检测等领域，革新的产品包括：
WPI-TBR1025/4100, 一氧化氮、硫化氢和过氧化氢等自由基检测仪为全球**和行业领导供应商。
EVOM2, 一款可以在6孔、12孔、24孔和96孔培养板中进行跨膜电阻测量的跨膜电阻仪，是该领域的产品风向标，用于上皮、内皮和肿瘤细胞培养过程中细胞状态的检测，并常用于药物动力学研究和肿瘤药效检测。
WPI-LWCC, 世界上**可以将光程做到2米以上微量样本检测流通池的生产厂家，可以用于海洋微量元素和环境微量物质的检测。
微量注射系统：PV系列气动微量注射系统用于质粒转染和细胞内注射；纳升微量注射系统可以确保您注射的精确到纳升级；多款微注射系统任您选择。
WPI的历史超过40年，在美国、英国、德国、加拿大、澳大利亚、新西兰、法国等欧美生物医学实验室是****的领导供应商之一，供应实验室产品种类超过5000种。我们也将为国内的科学家提供包含神经电生理、生物感应器、心血管和光谱等成套设备的销售及服务，同时提供数据采集系统 、动物实验等手术器械和玻璃毛细管等耗材的销售及服务。
暂无问答
本网站将在规定时间内给予删除等相关处理。
